Verify Your Mobile IMEI Number Online For Free

Verify Your Mobile IMEI Number Online For Free

Many a Times, we have asked ourselves this question: Is my IMEI/Phone Authentic?????
The reason this question pops up is Chinese Manufacturers are flooding the World Market with cheap imitation phones. (I went to a dubious shop & came across a Nokia 6300: Exact Body, But OS, completely different!!!!)
This put me to thinking, If I buy a phone, how do I verify my IMEI is unique. It is very likely, that a Chinese Vendor might have manufactured the phone & inserted some Nokia model's IMEI.
Extensive Online Search yielded the Following Site:

Click here to verify

Secret Codes Of Nokia

Secret Codes Of Nokia

To check the IMEI (International Mobile Equipment Identity) :

*#06#

Information you get from the IMEI :

XXXXXX XX XXXXXX X

TAC FAC SNR SP

TAC = Type approval code
FAC = Final assembly code
SNR = Serial number
SP = Spare

To check the phone Software Version (Firmware) :

*#0000#

Information you get from the it : (eg)

V 5.0604.0
23-01-06
RM-51

1ST Line = Software Version (Firmware)
2ND Line = The date of the software release
3RD Line = Phone type

Displays Bluetooth (BT) Device Address :

*#2820#

Displays MAC address of the WLAN adapter :

*#62209526#
This is available only in the newer devices that support WLAN.

To enter the service menu :

*#92702689#

Displays Serial number (IMEI).
Displays Production date (MM/YY).
Displays Purchase date (MM/YY). You can only enter the date once.
Displays Date of last repair (0000=No repair).
The next screen has Transfer User Data.
To exit this menu, turn the phone off and then back on.

Enhanced Full Rate Codec (EFR) :

Enhanced Full Rate will give you much better sound quality when you enable it. The new Enhanced Full Rate CODEC adopted by GSM uses the ASELP (AlgebraicCode Excitation Linear Prediction) compression technology. This technology allows for much greater voice quality in the same number of bits as the older Full Rate CODEC. The older technology was called LPC-RPE (Linear Prediction Coding with Regular Pulse Excitation). Both operate at 13 kilobits.(but you take up more space on the network, so they can charge you more). Also this improves call quality but decreases battery life by about 5%.

*3370#
EFR will be activated after a reboot of the phone (consumes more power).

#3370#
EFR will be switched off after a reboot of the phone.

Half Rate Codec (HR) :

Half Rate will give you bad sound quality, which gives the service provider the opportunity to have more calls on the network; and you might get a lower charge from them. (Will give you 30% longer talk-time).

*4720#
Half Rate coded will be activated after a reboot of the phone (better standby time).

#4720#
Half Rate coded will be de-activated after a reboot of the phone.

Clock Stopping :

*#746025625#

To check if the Sim-Clock can be Stopped. This option is dependant on your service provider network. (Sim-clock-stop is a kind of standby mode which will save battery time).

CHECK SIM-LOCK :

Note - If you bought your Nokia on UK Vodafone or UK Cellnet you do not need to check this because they both transmit on GSM900, and they don't lock the phones. However if you bought your phone on UK Orange or UK One2one your phone may be blocked. The reason is that they both transmitt on GSM1800. To make a call on GSM1800 you need what is known as a "Dual band" phone. A dual band phone is able to transmit on both GSM900 and GSM1800, so they lock the phones so you can't use it with any other network simcard. If you find that your phone is locked you can try different software to unlock it or you can ask your service provider who will gladly exchange the 10 digit code for a price.

This is how to check the status of the 4 different locks. Also don't try entering the wrong number, because after 3 times it will block the phone for good.

There are 4 different locks on your Nokia phone :

COUNTRY-LOCK
NETWORK-LOCK
PROVIDER-LOCK
SIMCARD-LOCK

The code to read out the sim-lock status of your phone is :

#PW+(MASTERCODE)+(Y)#

MASTERCODE = 1234567890
Y = NUMBER 1 TO 4

The master code is a secret code. The code has 10 digits. It must be computed with a program e.g. SmartDCT4Calc and/or DCT 4 code Calculator from IMEI etc.

"Y" Shows the status of the network-lock. Here you can enter a number from "1" to "4". The "4" is for the sim-card lock.

SIM-LOCK CHECKS :

#PW+1234567890+1# = GIVES PROVIDER-LOCK STATUS
#PW+1234567890+2# = GIVES NETWORK-LOCK STATUS
#PW+1234567890+3# = GIVES COUNTRY-LOCK STATUS
#PW+1234567890+4# = GIVES SIM-CARD-LOCK STATUS

Detail About Your Phone Os (Operating System)

Detail About Your Phone Os (Operating System)

Symbian OS software written for the S60 Platform 1st edition (S60v1) or 2nd edition (S60v2) is not binary compatible with S60 3rd edition (S60v3), because it uses a new, hardened version of the Symbian OS (v9.1).

Series 60 Version 1.0, based on Symbian OS 6.1

* Nokia 7650 (development name Calypso)

Series 60 1st Edition (Version 1.2), based on Symbian OS 6.1

* Nokia 3600
* Nokia 3620 (GSM 850/1900 successor of the 3650)
* Nokia 3650
* Nokia 3660 (GSM 900/1800/1900 successor of the 3650)
* Nokia N-Gage and N-Gage QD
* Samsung SGH-D700
* Sendo X
* Sendo X2
* Siemens SX1

Series 60 2nd Edition (Version 2.0), based on Symbian OS 7.0s

Contains new features like J2ME/MIDP 2.0 support and themes

* Nokia 6600 (development name Calimero)
* Samsung SGH-D710

Series 60 2nd Edition, Feature Pack 1 (Version 2.1), based on Symbian OS 7.0s

* Nokia 3230
* Nokia 6260
* Nokia 6620
* Nokia 6670
* Nokia 7610
* Panasonic X700
* Panasonic X800

Series 60 2nd Edition, Feature Pack 2 (Version 2.6), based on Symbian OS version 8.0a

Symbian 8.x has support for WCDMA (GSM 3G) and cdma2000 networks.

* Nokia 6630
* Nokia 6680
* Nokia 6681
* Nokia 6682

Series 60 2nd Edition, Feature Pack 3 (Version 2.8.), based on Symbian OS version 8.1a

* Nokia N70
* Nokia N72
* Nokia N90

S60 3rd Edition (Version 3.0), based on Symbian OS version 9.1

* Nokia 3250
* Nokia 5500
* Nokia E50
* Nokia E60
* Nokia E61
* Nokia E62
* Nokia E70
* Nokia N71
* Nokia N80
* Nokia N91
* Nokia N92
* Nokia N93
* Nokia N73

S60 3rd Edition, Feature Pack 1 (Version 3.1), based on Symbian OS version 9.2

* LG JoY
* Nokia 6290
* Nokia N95
* Samsung SGH-i520

S60v5

* N 97
* Nokia 5800
* Nokia 5230
* Nokia 5530
* Samsung i8910
* Sony Ericsson Satio

10 BlackBerry Troubleshooting Tips

10 BlackBerry Troubleshooting Tips

1 Check the signal strength
Checking the signal strength of your handheld will verify whether or not your handheld has a strong enough
signal to send and receive wireless information.
- Turn on your handheld.
- Click the Options icon. The Options screen appears.
- Click Status. The Status screen appears.
- In the Signal field, verify the value is less than 100dBm. A weak signal shows a number higher than
100dBm, such as 111dBm.
Note: For BlackBerry handhelds based on Java™, verify GPRS, 1X or NXTL network status indicators appear
in the status section of the screen.

2 Reset your handheld
Reset your handheld by completing one of the following steps:
• Press the Alt key + the Shift key + the Backspace key simultaneously
• Insert a paper clip into the reset hole, located beneath the battery cover, to perform a hard reset. On
some handhelds the reset hole is located the back of the handheld.

3 Check Network Settings
Checking the network settings on your handheld will verify that your handheld is properly configured to
send and receive information on the wireless network.
For handhelds based on Java:
1. On your handheld, click the Options icon. The Options screen appears.
2. Click Network. The Network screen appears.
3. Click Scan for Networks and verify the handheld is running on the correct network.
For handhelds based on C++:
1. On your handheld, click the Options icon. The Options screen appears.
2. Click Network Settings. The Network Settings screen appears.
3. In the Radio field, verify the value is set to On.
4. Verify the correct country is displayed for Roaming.
5. Verify the Status is active.
6. Click the track wheel. A menu appears.
7. Click Register Now and verify the handheld registration request has been sent.
Contact your service provider if you are unable to register the handheld, unable to connect to the correct
network, or do not have the correct options displayed in Roaming or Status fields.

4 Confirm the handheld-to-computer connection
Confirm that the handheld connects properly to the desktop computer.
1. Confirm the handheld is properly connected to the computer.
2. Close and re-open the BlackBerry Desktop Manager software on your computer.
3. Verify the handheld is detected.

5 Synchronize your handheld and desktop applications
Synchronizing your handheld with your desktop applications will verify that the information is up to date in
each location.
1. Connect the handheld to the desktop.
2. Open Desktop Manager and double-click the Intellisync icon. The Intellisync window appears.
3. Click Configure PIM. The Handheld Configuration window appears.
4. Select the application check boxes you want to synchronize.
5. Click OK. The Intellisync window appears.
6. Verify the Synchronize PIM option is selected.
7. Click Synchronize Now.

6 Send a test email message to your handheld
Send a test email message from your desktop email account (on your personal computer) to your handheld.
If you receive the message in your handheld Inbox, this verifies your mail server is able to process internal
messaging.

7 Send an email message and peer-to-peer message from your handheld
Confirm that you can send messages from your handheld to your desktop email account, or to other
handheld users:
1. Send a test email message from your handheld to your desktop email account.
2. Verify the email arrives in your Inbox and on your handheld.
3. Send a peer-to-peer message to another handheld or to your handheld to verify it is sent and received
successfully.

8 Verify messages are being redirected to your handheld
Verify that messages are being redirected to your handheld, based on your email redirection method:
• BlackBerry Enterprise Server: Check with your BlackBerry Server administrator to verify the server is
online and operating as expected.
• BlackBerry Desktop Redirector: Confirm the BlackBerry Desktop Redirector software is running on the
computer and it displays a status of Running.
• BlackBerry Internet Service: Contact your service provider to verify the account is provisioned correctly.

9 Run the Application Loader
Running the application loader will help you verify that your applications are loaded correctly.
Warning: Back up your handheld data with the Backup and Restore utility before you complete the
following steps.
1. Connect the handheld to the desktop.
2. Open Desktop Manager and double-click the Application Loader icon.
3. Click Next.
4. Follow the on-screen instructions.

10 Search the Technical Knowledge Center
To search the Technical Knowledge Center for specific issues and troubleshooting tips, refer to
http://www.blackberry.com/knowledgecenter

Common iPhone Problems And Their Solutions

Common iPhone Problems And Their Solutions

If iPhone doesn't appear in iTunes or you can't sync iPhone

1. The iPhone battery might need to be recharged. For information about charging iPhone, see "Charging the Battery" in the iPhone User's Guide.
2. If that doesn't work, disconnect other USB devices from your computer and connect iPhone to a different USB 2.0 port on your computer (not on your keyboard).
3. If that doesn't work, turn iPhone off and turn it on again. Press and hold the Sleep/Wake button on top of iPhone for a few seconds until a red slider appears, and then slide the slider. Then press and hold the Sleep/Wake button until the Apple logo appears.
   
   Note: If you enter the SIM PIN incorrectly three times, you may need to contact your carrier for a Personal Unlocking Key (PUK) to enable your SIM card again.
4. If that doesn't work, restart your computer and reconnect iPhone to your computer.
5. If that doesn't work, download and install (or reinstall) the latest version of iTunes.

If you can't make or receive calls, send or receive text messages, or access email or the web

1. Check the cell signal indicator in the status bar at the top of the screen. If there are no bars, or if it says "No service," try moving to a different location. If you're indoors, try going outdoors or moving closer to a window.
2. Check to make sure you’re in an area with network coverage. Go to your carrier's website to see network coverage areas.
3. Make sure airplane mode isn't on. From the Home screen choose Settings, then turn Airplane Mode off.
4. If that doesn't work, turn airplane mode on, wait 15 seconds, then turn airplane mode off again.
5. Make sure to include an area code for every phone number in your contacts list that you use to send or receive text messages.
6. If that doesn't work, turn iPhone off and turn it on again. Press and hold the Sleep/Wake button on top of iPhone for a few seconds until a red slider appears, then slide the slider. Then press and hold the Sleep/Wake button until the Apple logo appears.
   
   Note: If you enter the SIM PIN incorrectly three times, you may need to contact your carrier for a Personal Unlocking Key (PUK) to enable your SIM card again.
7. If that doesn't work, there may be an issue with your wireless service. Call your carrier or go to your carrier's website.
8. If that doesn't work, restore the iPhone software.

MMS: Original iPhone does not support MMS. MMS is available on iPhone 3G and iPhone 3GS if it is supported by the wireless carrier.


If iPhone won't turn on, or the display freezes or doesn't respond

1. Press and hold the Home button for at least six seconds, until the application you were using quits.
2. If that doesn't work, turn iPhone off and turn it on again. Press and hold the Sleep/Wake button on top of iPhone for a few seconds until a red slider appears, and then slide the slider. Then press and hold the Sleep/Wake button until the Apple logo appears.
3. If that doesn't work, reset iPhone. Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears.

If iPhone continues to freeze or not respond after you reset it

1. Reset iPhone settings. From the Home screen choose Settings > General > Reset > Reset All Settings. All your preferences are reset, but no data or media is deleted.
2. If that doesn't work, reset iPhone. Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears restore the iPhone software.

How to make your own iPhone Ringtone and transfer it to your iPhone directly?

How to make your own iPhone Ringtone and transfer it to your iPhone directly?

Here are the steps:

1. Open iTunes.
2. Find the song (audio file) that you want to make into a ringtone.
3. Decide the part of the song you'd like to use as your ringtone and make a note of the start and stop times of the song.
4. Right-click the song and select Get Info and click the Options tab.
5. Type in the start time of your ringtone in the Start Time text box in the minutes:seconds format. (ex. 3:41)
6. Type in the end time of your ringtone inthe Stop Time text box. (Make sure the ringtone is no more than 40 seconds)
7. Click OK. then Right-click the song again and select Convert Selection to AAC. Wait for iTunes to convert your song. It will create a duplicate file.
8. Right-click the ringtone and select Delete.
9. Click to you see the option to Keep Files.
10. Find the file under Music > iTunes > iTunes Music and under the band's/artist's name. It will have an extension of "m4a."
11. Replace the m4a extension of your ringtone with m4r. You can either double-click slowly to rename your file, or right-click and select Get Info on a Mac or Rename on a Windows PC.
    Note: If you are unable to rename the extension then go to Tools > Folder Options > View > and temporarily uncheck "Hide Extensions for know file types".
    
12. Click use .m4r or and ignore any warnings about changing.
    
13. Double-click the ringtone file. iTunes will automatically add it to your ringtones folder in your iTunes Music Library.
14. Connect your iPhone and sync your ringtones. It should now be available on your iPhone.

If you are having trouble syncing, find the ringtone in your Ringtones folder and change the extension back to .M4A, then attempt to sync again. Then instead of deleting it, you can also drag the newly converted ringtone to your desktop from iTunes.

This will not work with songs bought from the iTunes store or that have DRM (copy protection). It's probably best to rip the song from a CD you own. Also, this may not work with the latest version of Leopard.

Blacksn0w Is Live* Now Unlock IPhone 3G, 3GS 3.1.2 and baseband 05.11.07

blacksn0w is live* Now Unlock IPhone 3G, 3GS 3.1.2 and baseband 05.11.07 !!!!!

blacksn0w is a free unlock for the latest iPhone 3G and 3GS
blackra1n is a super simple jailbreak used to install unlock
new visitors, go to blackra1n.com download and have fun

blackra1n RC3 is also live for both Windows and Mac!!! Clean firmware 3.1.2 and baseband 05.11.07 are recommended.

Updates:
Unlock!!!
Hacktivation
Keep legit activation if activated before running app
15 seconds faster, you'll feel it
Tiger + PPC support

Go to blackra1n.com to download
For support, blackra1n.support at gmail...but read this first

blacksn0w is also available on Cydia, add blackra1n.com as repo
requires firmware >= 3.1 and baseband 05.11.07

iClarified has made some nice tutorials:

How to Jailbreak and Unlock Your iPhone 3G, 3GS Using BlackSn0w [Windows]
How to Jailbreak and Unlock Your iPhone 3G, 3GS Using BlackSn0w [Mac

P.S : this is just copy/past Special thanks to Geohot for making this unlock possible

How to jailbreak iphone/iPod Touch OS 3.1.2 with blackra1n RC 2

How to jailbreak iphone/iPod Touch OS 3.1.2 with blackra1n RC 2

1.Download iTunes 8

ITUNE 8.0

2.Restore to OS 3.1.2 via iTunes.

3.1.2 (3G): iPhone1,2_3.1.2_7D11_Restore.ipsw

3.Once your iphone/iPod Touch has upgraded to 3.1.2, download blackra1n. Use Windows XP compatibility mode if you’re using Windows Vista or Windows 7

4.Launch the tool, and click the ‘make it ra1n’ button

5.It’ll take sometime while your iPod Touch is jailbroken. You’ll see George’s picture, which means it’s working.

6.After it’s down, it’ll restart.

7.You should see the blackra1n icon in your apps now. Launch it.

8.From here, you can install Cydia, which lets you install jailbreak applications. There is an option to install Rock or Icy as well, which are Cydia alternatives.

Special Thanks To Ithinkdiff.com

Samsung Omnia - How to set mp3 to ringtones quickly

Samsung Omnia - How to set mp3 to ringtones quickly

If you have a mp3 file on your memory/storage device just click and hold for a few seconds as it will pop up a menu and you can select it as ringtone. No need to physically copy to your ringtone menu as it does it all for you. It is simple easy methode for setting up ringtone.

http://homeworktips.about.com: Cell Phone Tips and Tricks - Students and Cell Phones

Reminders and alarms are some of the most useful tools on a cell phone, but they are also the least appreciated.

Most cell phones come with a scheduler to allow you to set an alarm at a certain time of day or on a certain date. You can set alarms to remind you of an established daily homework time to keep you from chatting right through your work time. For instance, you can set up a beeper that goes off every night at 7.

You could also use calendar reminders to notify you when projects and assignments are due. These reminders can be set up weeks and months ahead of time." http://homeworktips.about.com/od/schoolsupplies/tp/cellphones.htm

5 Tips to Make Your Cell Phone Battery Last Longer

5 Tips to Make Your Cell Phone Battery Last Longer

Reducing power consumption helps fight global warming

Batteries can have a much longer life, if people follow just a few simple tips on how to save their power

Modern mobile phones have numerous applications installed, as well as a bunch of other features, including photo cameras, blitzes, Bluetooth devices and others. All these accessories take up large amounts of electricity from the battery, prompting users to recharge them more often. This consumes a lot of electric energy, placing unnecessary strain on power plants, to supply more juice.

Using energy-saving settings is a great way of reducing the overall electrical consumption of your phone, especially if you turn off the back light, which accounts for the depletion of the battery to a great extent. Screen-savers are also huge power drains, as they animate the screen even when the phone is still in the pocket.

New photo editing software, built into most mobile phones, are undoubtedly a great way of fine-tuning a photo on the spot, freshly after the moment it was taken. But using the blitz and the included pieces of software places great strain on the battery, which may need recharging after a couple of hours playing with these accessories. A good way to avoid this is by taking pictures in sunny spots, where additional lights are not required, and editing them at home.

Usually, if you stop an average guy on the street and take his phone, you will notice it has Bluetooth and WiFi turned on, as well as GPS, e-mail applications and several feeds, for the weather, sports results, news and whatnot. Turning all these applications off once you've finished working with them is a great way to save power. Also, when on the move, turn off the phone completely, as there's no signal anyway, and it takes a lot of power for the device to look for a connection.

Headsets are another one of life's little wonders, especially in a crowded place, where movements such as reaching inside your pocket are impossible. But you don't necessarily need a Bluetooth device for that; corded headphones work just as well. In fact, they might save you from curious glances, which are inevitably drawn to you when people think you're talking to yourself.

The next step is the easiest one – simply take care of the battery physically. Its contacts may become covered in dust or other such stuff, so cleaning them once in a while might prove to be an excellent idea. The link between the phone and the battery itself will be near perfect, and the amounts of electricity the battery will need to generate will be much smaller.